Mechanical instrument TXLG-100A large pumping speed air cooled industrial vacuum pump dry screw pump

1.Product Description

1）Dry screw vacuum pump, is the use of a pair of screw, made in the pump shell synchronous high-speed reverse rotation of the effects of the suction and exhaust and suction device, two screw fine dynamic balancing correction, and is supported by bearings, is installed in the pump shell, between screw and screw has a certain gap, so the pump work, no friction between each other, smooth running, low noise, Working chamber without lubricating oil, therefore, dry screw pump can remove a lot of steam and a small amount of dust gas occasions, higher limit vacuum, lower power consumption, energy saving, maintenance-free and other advantages.

2）Dry Oil-Free Air Cooling Screw Vacuum Pump ,This is an advanced and widely used vacuum pump at present, It is one of the best-selling products of our company.

3)  It adopts explosion-proof motor with high configuration, It has the characteristics of low noise, no oil and pollution, clean and high vacuum, simple and convenient use, operation and maintenance, Widely used in many industries, For example, oil and gas recovery, vacuum coating, biomedicine, food processing, single crystal furnace, vacuum forming, vacuum melting, electronic photovoltaic, semiconductor synthesis and many other industries are used.The dry oil-free screw vacuum pump produced by our company is divided into air cooling and water cooling according to the extraction rate, and there are many models for you to choose

2.Features

 Performance excellence

Air-cooled dry screw vacuum pump has no pollution to the vacuum system

 Efficient

Extreme vacuum degree 1Pa 

One of the world's few high-end screw vacuum manufacturing capabilities

 Flexible

Suitable for flammable and explosive, high water vapor environment, corrosive environment, clean vacuum requirements, etcSuitable for flammable and explosive, high water vapor environment, corrosive environment, clean vacuum requirements, etc

3.Technical parameters

4.Typical Use

Oil and gas recovery       Biological medicine             Food Processing        

Single crystal furnace      Vacuum formingVacuum    flame refining

Electronic photovoltaic     Semiconductor synthesis   Biological products

Pharmaceutical process   Chemical process

Solvent recovery       Organic solvent recovery       Medical instruments

Oil and gas recovery        Thin film preparation           

Biochemical testing analysis

microelectronics       solar energy      Material Handling

5.Our Advantages

here is no medium in the working chamber, which can obtain a clean vacuum.

(1)     No clearance between rotating parts, high speed operation, small overall volume.

(2)     There is no compression in the gas, suitable for extraction of coagulable gas.

(3)     Can remove a lot of steam and a small amount of dust gas occasions.

(4)     High vacuum, the ultimate vacuum up to 1 Pa.

(5)     Screw material is high strength special material, material density, wear resistance, stable performance.

(6)     No friction rotating parts, low noise..

(7)     Simple structure, convenient maintenance.Wider range of use: corrosive environment can be used.

(8)     No oil consumption, no water.

(9)     Pump gas directly discharged from the pump body, no pollution of water, no environmental pressure, more convenient gas recovery.

(10) It can be composed of oil-free unit with Roots pump and molecular pump.