Liquid Ring Vacuum Pumps & Compressors，2BE4

Description:

Reliable, efficient, excellent performance

The 2BE4 liquid ring vacuum pump and compressor series is an evolution of the proven 2BE3 model and is designed to provide performance, reliability and efficiency that exceeds previous models. The 2BE4 is 8% more efficient and has reduced maintenance requirements compared to previous models. Require.

Vacuum Capacity

The 2BE4 pump operates efficiently over the entire vacuum range without changing the pump internals. When equipped with a center shroud, it can be used in two applications with a difference of up to 12 inHg (400 millibar). This has obvious advantages as it reduces the number of vacuum pumps used, saving space and installation costs.

flat disc liquid ring vacuum pump/compressor designs have been supplied to thousands of plants around the world, providing proven performance, reliability and peace of mind. With continuous innovation, our designs feature:

• The discs feature variable porting so the pump performance is optimized over the entire operating range.
• Large pressure difference capability
• High tolerance to liquid residues
• Large inspection port for easy internal inspection
• When closed, the orifice allows the pump to be completely drained

The capacity range of this series is 1500 to 19000 cubic feet per minute (2500 to 33000 cubic meters per hour). This is achieved by modifying the shaft bearings and optimizing the port plate and impeller. The improvement of internal flow channels has reduced energy requirements by 6% to 8%. The optimization of shaft bearings improves the flexibility of pump operation in case of malfunctions, ensuring better lubrication and extending service life. Optional connections for flushing the casing are also provided. This feature improves cleanliness and lifespan.

When operating as a vacuum pump and compressor, the discharge pressure range is 36 psia (2.5 bar abs.)

Some applications require both vacuum and compression in one process. Our liquid ring vacuum pumps and compressors can handle the gas in one pump instead of two separate machines - reducing costs and simplifying installation.

Flexible installation and low noise operation

The unique inlet configuration allows for top and side inlet placement to accommodate low headroom installations. In installations where space is limited, the 2BE4 can be top mounted with the discharge separator, saving floor space and eliminating the need for trenches. The 2BE4 pump is very quiet during operation. Even with the larger pumps, sound levels are recorded at only 72 to 85 dB(A) measured at 3.3 feet (1 meter) from the source.

Designed for demanding environments

Designed to operate in demanding environments such as the paper, power, mining, sugar and chemical processing industries, these pumps offer durability and reliability at low operating costs. The standard polyisoprene lining on the pump body provides excellent corrosion resistance against aggressive process gases and liquids. The polyisoprene lining also consumes less energy than an equivalent unlined pump. For added corrosion resistance, some models feature stainless steel internal components.

Dimensions

Technical Parameter

• Inhalation flow rate: 1200 to 19000 ACFM (2000 to 32300 m3/h)
• Vacuum range: up to 4.7 inHgA (up to 160 mbar abs.)
• Exhaust pressure range: 36 psi (2.5 bars abs)
• Pressure difference: up to 22 psi (up to 1.5 bar)
• Shaft seal: mechanical seal (single end/double end) for stuffing box (standard) as required
• Structural materials: ductile iron, stainless steel, combination of both