CNC industry vacuum pump automatic drainage system customized vacuum unit of negative pressure station

How it works"

Start the main vacuum pump group of the system to start working until the vacuum degree in the vacuum tank reaches the set upper limit, the vacuum pump automatically stops running, and the vacuum in the central vacuum system is automatically cut off by the vacuum check valve on the pipeline and is maintained. If the vacuum level in the vacuum tank drops and falls below the set lower limit due to work requirements, the standby vacuum pump set is automatically started. In this cycle, the vacuum level of the vacuum system can maintain a stable vacuum source to meet the requirements of production.

「Performance characteristics」

Since the first start-up of the unit, the entire operation process can be fully automated. During its working process, the vacuum degree everywhere in the vacuum system always fluctuates up and down within its allowable range, and its fluctuation range can be adjusted according to user requirements; If the vacuum level falls below the set value, the alarm will warn you. The device automatically controls the system under unmanned operation and can automatically close the vacuum system in the event of a power failure; The device is equipped with an air-water separator, which can save water sources and reduce environmental pollution; The vacuum tank of the device can be designed as horizontal and vertical according to the site, and the installation is more flexible.

「Installation Schematic」