Introduction:
2BV series liquid ring vacuum pump is suitable for suction gas and vapour ,and the suction pressure can reach 33mbar (abs.)(i.e.97% vacuum degree ).When the liquid ring vacuum pump works under the condition that the suction pressure is near the limited vacuum (saturated pressure of the operating liquid )for a long time ,it should couple with the cavitation protection pipe in order to protect the pump .When it’s used as a compressor ,the maximum pressure is 0.26mpa(abs).As a new generation of energy-saving product ,2BV series liquid ring vacuum pump will replace the SK and 2SK series liquid ring vacuum pumps and W,WY,WL series reciprocating vacuum pumps completely with their superior performance and advantages .
2BV6 series liquid ring vacuum pumps and compressors are mainly used for pumping the explosive gas or working in the flammable and explosive environment .The technical parameter of each type is the same as the corresponding type of the 2BV2and 2BV5 series products
Grease lubricated molecular pumpturbo molecular pumpTxFB-1300Z grease lubricated molecular pump technical data
Txfb-1300z Grease lubricated molecular pump
High vacuum flange 200 CF 200 ISO-K
Front pipe flange 40 KF
Protective gas inflatable flange (anti-corrosion pump) 16 KF
Extraction speed (L/S) 1300
Compression ratio
N2 >109
H2 >1X104
Ultimate pressure (Pa) <8×10-8 <5×10-7
Motor revolution (N/min) 24000
Lubricate ceramic bearings with bearing grease
The vibration value of 0.1 microns or less
Startup time (min) <5
Recommended use of the front stage pump 8-15 L/S
Cooling mode Water cooling (air cooling)
Water cooling water temperature ≤20℃
Water cooling water flow (L/min) 1
Installation direction arbitrary Angle
Pump weight (kg) ≈27
Txfb-1300zf Grease lubricated air cooled composite molecular pump
High vacuum flange (inlet flange) 200 CF 200 ISO-K
Front pipe flange 40 KF
Protective gas inflatable flange (anti-corrosion pump) 16 KF
Extraction speed (L/S) 1300
Compression ratio N
2 > 10
9 H
2 >1X10
4 ultimate pressure (Pa) <2×10
7 < 5 x 10
-7 Motor revolution (N/min) 24000
Lubricate ceramic bearings with bearing grease
The vibration value of 0.1 microns or less
Startup time (min) <5
Recommended use of the front stage pump 4-8L/S
Cooling mode air cooling
Installation direction arbitrary Angle
Pump weight (kg) ≈30
Turbo pump Grease lubricated molecular pump
Txfb-650z grease lubricated compound molecular pump
High vacuum flange (inlet flange) 150 CF 160 ISO-K
Front pipe flange 40 KF
Protective gas inflatable flange (anti-corrosion pump) 16 KF
Extraction speed (L/S) 650
Compression ratio N
2 > 10
9 H
2 >1X10
4 ultimate pressure (Pa) <2×10
7 < 5 x 10
-7 Motor revolution (N/min) 24000
Lubricate ceramic bearings with bearing grease
The vibration value of 0.1 microns or less
Startup time (min) <5
Recommended use of the front stage pump 4-8L/S
Cooling mode Water cooling
Installation direction arbitrary Angle
Pump weight (kg) ≈30
Introduction:
2BV series liquid ring vacuum pump is suitable for suction gas and vapour ,and the suction pressure can reach 33mbar (abs.)(i.e.97% vacuum degree ).When the liquid ring vacuum pump works under the condition that the suction pressure is near the limited vacuum (saturated pressure of the operating liquid )for a long time ,it should couple with the cavitation protection pipe in order to protect the pump .When it’s used as a compressor ,the maximum pressure is 0.26mpa(abs).As a new generation of energy-saving product ,2BV series liquid ring vacuum pump will replace the SK and 2SK series liquid ring vacuum pumps and W,WY,WL series reciprocating vacuum pumps completely with their superior performance and advantages .
2BV6 series liquid ring vacuum pumps and compressors are mainly used for pumping the explosive gas or working in the flammable and explosive environment .The technical parameter of each type is the same as the corresponding type of the 2BV2and 2BV5 series products
Grease lubricated molecular pumpturbo molecular pumpTxFB-1300Z grease lubricated molecular pump technical data
Txfb-1300z Grease lubricated molecular pump
High vacuum flange 200 CF 200 ISO-K
Front pipe flange 40 KF
Protective gas inflatable flange (anti-corrosion pump) 16 KF
Extraction speed (L/S) 1300
Compression ratio
N2 >109
H2 >1X104
Ultimate pressure (Pa) <8×10-8 <5×10-7
Motor revolution (N/min) 24000
Lubricate ceramic bearings with bearing grease
The vibration value of 0.1 microns or less
Startup time (min) <5
Recommended use of the front stage pump 8-15 L/S
Cooling mode Water cooling (air cooling)
Water cooling water temperature ≤20℃
Water cooling water flow (L/min) 1
Installation direction arbitrary Angle
Pump weight (kg) ≈27
Txfb-1300zf Grease lubricated air cooled composite molecular pump
High vacuum flange (inlet flange) 200 CF 200 ISO-K
Front pipe flange 40 KF
Protective gas inflatable flange (anti-corrosion pump) 16 KF
Extraction speed (L/S) 1300
Compression ratio N
2 > 10
9 H
2 >1X10
4 ultimate pressure (Pa) <2×10
7 < 5 x 10
-7 Motor revolution (N/min) 24000
Lubricate ceramic bearings with bearing grease
The vibration value of 0.1 microns or less
Startup time (min) <5
Recommended use of the front stage pump 4-8L/S
Cooling mode air cooling
Installation direction arbitrary Angle
Pump weight (kg) ≈30
Turbo pump Grease lubricated molecular pump
Txfb-650z grease lubricated compound molecular pump
High vacuum flange (inlet flange) 150 CF 160 ISO-K
Front pipe flange 40 KF
Protective gas inflatable flange (anti-corrosion pump) 16 KF
Extraction speed (L/S) 650
Compression ratio N
2 > 10
9 H
2 >1X10
4 ultimate pressure (Pa) <2×10
7 < 5 x 10
-7 Motor revolution (N/min) 24000
Lubricate ceramic bearings with bearing grease
The vibration value of 0.1 microns or less
Startup time (min) <5
Recommended use of the front stage pump 4-8L/S
Cooling mode Water cooling
Installation direction arbitrary Angle
Pump weight (kg) ≈30