Original blade group 90058500003
The kit includes 3 blades made of plastic
Specified use: Plastic blades are used for oil-lubricated vacuum pumps and compressors. They wear little and must be replaced during repair or layering.
Number of blades/group: 3
WN No.: WN150-164
Blade material: Resin & plastic
Original blade group 90058100003
The kit includes 3 blades made of plastic
Specified use: Plastic blades are used for oil-lubricated vacuum pumps and compressors. They wear little and must be replaced during repair or layering.
Number of blades/group: 3
WN No.: WN150-157
Blade material: Resin & plastic
Original blade group 90051500003
The kit includes 3 blades made of plastic
Specified use: Plastic blades are used for oil-lubricated vacuum pumps and compressors. They wear little and must be replaced during repair or layering.
Number of blades/group: 3
WN No.: WN150-072
Blade material: Resin & plastic
Original blade group 90050500003
The kit includes 3 blades made of plastic
Specified use: Plastic blades are used for oil-lubricated vacuum pumps and compressors. They wear little and must be replaced during repair or layering.
Number of blades/group: 3
WN No.: WN150-050
Blade material: Resin & plastic
Grupo de cuchillas original 90058300003
El kit incluye 3 cuchillas de plástico
Uso especificado: Las cuchillas de plástico se utilizan para bombas de vacío y compresores lubricados con aceite. Se desgastan poco y deben reemplazarse durante la reparación o las capas.
Número de cuchillas/grupo: 3
Número de WN: WN150-162
Material de la cuchilla: resina y plástico
The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of
25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available
The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of
25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available
TX TVT Series vacuum pumps are medium vacuum, dry displacement pumps and are designed to operate on a continuous duty basis at any vacuum level from open flow to 27 inches Hg. The VT Series dry rotary vane pumps utilize self-lubricating, graphite composite vanes. No oil to change and only minimal maintenance is required.
Technical parameters of 2tx-8 series double stage rotary vane vacuum pump
Product features
1. It can operate from one atmosphere to the ultimate pressure
Can be used from atmospheric pressure to ultimate pressure.
2. Under low vacuum pressure, good air extraction speed can still be maintained
low vacuum pressure, it can still maintain a good pumping speed。
3. Low noise and vibration
Low noise, low vibration
4. The built-in outlet filter element can achieve 99.9% oil and gas filtration effect
Built-in outlet filter, up to 99.9% oil and gas filtration effect
5. Super function of eliminating water vapor
Super strong function of removing water vapor
6. Air cooling, economical and convenient < water cooling can also be selected
Air cooling, economical and convenient
7. The air inlet is equipped with a check valve to avoid the reverse flow of vacuum oil when the pump stops
The air inlet is equipped with a check valve to avoid the reverse flow of the vacuum oil when the pump stops.
8. Compact structure, small volume and space saving
Compact structure, small size and space saving
9. It can be used together with various accessories, so it can meet the needs of various applications
It can be used with various accessories, so it can meet the needs of various applications
10. Pumping speed: 8m3/h ~ 65m3/h
Pumping speed: 8m3/h～65m3/h
11. Ultimate partial pressure: 10-4mbar c/s
Limit partial pressure: 10-4mbar c/s
12. Built in anti oil return valve
Built-in anti-return valve
Original blade group 90058500003
The kit includes 3 blades made of plastic
Specified use: Plastic blades are used for oil-lubricated vacuum pumps and compressors. They wear little and must be replaced during repair or layering.
Number of blades/group: 3
WN No.: WN150-164
Blade material: Resin & plastic
Original blade group 90058100003
The kit includes 3 blades made of plastic
Specified use: Plastic blades are used for oil-lubricated vacuum pumps and compressors. They wear little and must be replaced during repair or layering.
Number of blades/group: 3
WN No.: WN150-157
Blade material: Resin & plastic
Original blade group 90051500003
The kit includes 3 blades made of plastic
Specified use: Plastic blades are used for oil-lubricated vacuum pumps and compressors. They wear little and must be replaced during repair or layering.
Number of blades/group: 3
WN No.: WN150-072
Blade material: Resin & plastic
Original blade group 90050500003
The kit includes 3 blades made of plastic
Specified use: Plastic blades are used for oil-lubricated vacuum pumps and compressors. They wear little and must be replaced during repair or layering.
Number of blades/group: 3
WN No.: WN150-050
Blade material: Resin & plastic
Grupo de cuchillas original 90058300003
El kit incluye 3 cuchillas de plástico
Uso especificado: Las cuchillas de plástico se utilizan para bombas de vacío y compresores lubricados con aceite. Se desgastan poco y deben reemplazarse durante la reparación o las capas.
Número de cuchillas/grupo: 3
Número de WN: WN150-162
Material de la cuchilla: resina y plástico
The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of
25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available
The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of
25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available
TX TVT Series vacuum pumps are medium vacuum, dry displacement pumps and are designed to operate on a continuous duty basis at any vacuum level from open flow to 27 inches Hg. The VT Series dry rotary vane pumps utilize self-lubricating, graphite composite vanes. No oil to change and only minimal maintenance is required.
Technical parameters of 2tx-8 series double stage rotary vane vacuum pump
Product features
1. It can operate from one atmosphere to the ultimate pressure
Can be used from atmospheric pressure to ultimate pressure.
2. Under low vacuum pressure, good air extraction speed can still be maintained
low vacuum pressure, it can still maintain a good pumping speed。
3. Low noise and vibration
Low noise, low vibration
4. The built-in outlet filter element can achieve 99.9% oil and gas filtration effect
Built-in outlet filter, up to 99.9% oil and gas filtration effect
5. Super function of eliminating water vapor
Super strong function of removing water vapor
6. Air cooling, economical and convenient < water cooling can also be selected
Air cooling, economical and convenient
7. The air inlet is equipped with a check valve to avoid the reverse flow of vacuum oil when the pump stops
The air inlet is equipped with a check valve to avoid the reverse flow of the vacuum oil when the pump stops.
8. Compact structure, small volume and space saving
Compact structure, small size and space saving
9. It can be used together with various accessories, so it can meet the needs of various applications
It can be used with various accessories, so it can meet the needs of various applications
10. Pumping speed: 8m3/h ~ 65m3/h
Pumping speed: 8m3/h～65m3/h
11. Ultimate partial pressure: 10-4mbar c/s
Limit partial pressure: 10-4mbar c/s
12. Built in anti oil return valve
Built-in anti-return valve
