Stable and reliable, high efficiency and energy saving
Cold and high temperature resistance: it can adapt to different environments and weather, and can still maintain stable operation in cold winter and summer. Keel motor: the compressor keel motor realizes tight winding, which is conducive to improving motor efficiency.
Mute design: Mute compressor, improve component structure, and create mute products.
Low noise, strong wind and high efficiency
Turbine centrifugal fan: after the dynamic balance test, the rotor runs smoothly and has low noise.
Enclosed motor: the casing completely wraps the movement to avoid leakage caused by the exposure of the movement and to achieve protection.
Double layer all copper condenser, 8 new copper tubes with internal thread are made of 0.1mm hydrophilic aluminum foil material: the condensed water is easy to condense into water droplets, which speeds up the cooling speed and effectively avoids the noise caused by the condensed water hindering the air flow.
Intelligent drive circuit of humidity sensor
Humidity sensor: it has the advantages of large humidity detection range, small temperature dependence, single-chip microcomputer control and no correction, and large temperature and humidity detection range.
NEW Edwards EMF20 (EMF-20) Oil Mist Exhaust Filter, KF25 Ports, Designed for Edwards for RV12, E1M18, E2M18 Vacuum Pumps (Edwards Part Number A462-29-000)
This EMF Outlet Oil Mist Filter is suitable for all Edwards Rotary Vane pumps up to E2M18. This EMF20 (EMF-20) exhaust filter assembly is supplied with NW25 clamp, centering ring, O-Ring, NW25 to 3/4 BSP adapter, 1 oil element filter and 1 odor element. The benefits of the oil mist filter includes: protection from oil mist emissions as required by COSHH and health and safety regulations. If the oil element becomes blocked, an integral pressure relief valve opens. This filter is very efficient at 99.999% DOP test and is also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. Replacement oil elements and odor elements are available on this website. For complete specifications download instruction manual (see below avaliable below).
Edwards EMF10 EMF-10 Oil Mist Exhaust Filter, KF25 Ports, Designed for Edwards for RV3, RV5, RV8, RV12, E2M2, E2M5, E2M8, & E2M12 Vacuum Pumps.
Edwards Part Number A462-26-000
This EMF Outlet Oil Mist Filter is suitable for all Edwards Rotary Vane pumps up to E2M12. This EMF10 EMF-10 exhaust filter assembly is supplied with NW25 clamp, centering ring, O-Ring, NW25 to 3/4 BSP adapter, 1 oil element filter and 1 odor element. The benefits of the oil mist filter includes: protection from oil mist emissions as required by COSHH and health and safety regulations. If the oil element becomes blocked, an integral pressure relief valve opens. This filter is very efficient at 99.999% DOP test and is also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. Replacement oil elements and odor elements are available on this website. For complete specifications download instruction manual (see below avaliable below).
This Pfeiffer HiPace 300, 300H, and 300C turbo pump oil fluid reservoir kit is used when performing Level 1 maintenance on the pump. The oil fluid reservoir lubricates the mechanical bearing at the bottom of the pump and keeps the pump operating at peak efficiency. This kit includes the oil fluid lubricant impregnated felt reservoir, O-ring and other required seals. The reservoir comes pre-filled with the proper amount of oil. Additional lubricant is not required. The oil fluid reservoir kit should be replaced at a minimum of every 4 years - more frequently if the pump is used under extreme operating conditions, or if the pump is exposed to unclean processes. This Pfeiffer oil fluid reservoir kit has part number PM 143 451 AT.
This Pfeiffer HiPace 80 turbo pump oil fluid reservoir kit is used when performing Level 1 maintenance on the pump. The oil fluid reservoir lubricates the mechanical bearing at the bottom of the pump and keeps the pump operating at peak efficiency. This kit includes the oil fluid lubricant impregnated felt reservoir, O-ring and other required seals. The reservoir comes pre-filled with the proper amount of oil. Additional lubricant is not required. The oil fluid reservoir kit should be replaced at a minimum of every 4 years - more frequently if the pump is used under extreme operating conditions, or if the pump is exposed to unclean processes. This Pfeiffer oil fluid reservoir kit has part number PM 143 740-T.
The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of
25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available
Step1: inhale and seal all the air in the volume chamber, and the compression begins;
Step 2: continue to compress to the center point of the volume cavity;
Step3: compress the air to the center of the volume chamber, and the exhaust will begin soon;
Step4: exhaust, end of a compression process
Step1: inhale and seal all the air in the volume chamber, and the compression begins;
Step 2: continue to compress to the center point of the volume cavity;
Step3: compress the air to the center of the volume chamber, and the exhaust will begin soon;
Step4: exhaust, end of a compression process
Stable and reliable, high efficiency and energy saving
Cold and high temperature resistance: it can adapt to different environments and weather, and can still maintain stable operation in cold winter and summer. Keel motor: the compressor keel motor realizes tight winding, which is conducive to improving motor efficiency.
Mute design: Mute compressor, improve component structure, and create mute products.
Low noise, strong wind and high efficiency
Turbine centrifugal fan: after the dynamic balance test, the rotor runs smoothly and has low noise.
Enclosed motor: the casing completely wraps the movement to avoid leakage caused by the exposure of the movement and to achieve protection.
Double layer all copper condenser, 8 new copper tubes with internal thread are made of 0.1mm hydrophilic aluminum foil material: the condensed water is easy to condense into water droplets, which speeds up the cooling speed and effectively avoids the noise caused by the condensed water hindering the air flow.
Intelligent drive circuit of humidity sensor
Humidity sensor: it has the advantages of large humidity detection range, small temperature dependence, single-chip microcomputer control and no correction, and large temperature and humidity detection range.
NEW Edwards EMF20 (EMF-20) Oil Mist Exhaust Filter, KF25 Ports, Designed for Edwards for RV12, E1M18, E2M18 Vacuum Pumps (Edwards Part Number A462-29-000)
This EMF Outlet Oil Mist Filter is suitable for all Edwards Rotary Vane pumps up to E2M18. This EMF20 (EMF-20) exhaust filter assembly is supplied with NW25 clamp, centering ring, O-Ring, NW25 to 3/4 BSP adapter, 1 oil element filter and 1 odor element. The benefits of the oil mist filter includes: protection from oil mist emissions as required by COSHH and health and safety regulations. If the oil element becomes blocked, an integral pressure relief valve opens. This filter is very efficient at 99.999% DOP test and is also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. Replacement oil elements and odor elements are available on this website. For complete specifications download instruction manual (see below avaliable below).
Edwards EMF10 EMF-10 Oil Mist Exhaust Filter, KF25 Ports, Designed for Edwards for RV3, RV5, RV8, RV12, E2M2, E2M5, E2M8, & E2M12 Vacuum Pumps.
Edwards Part Number A462-26-000
This EMF Outlet Oil Mist Filter is suitable for all Edwards Rotary Vane pumps up to E2M12. This EMF10 EMF-10 exhaust filter assembly is supplied with NW25 clamp, centering ring, O-Ring, NW25 to 3/4 BSP adapter, 1 oil element filter and 1 odor element. The benefits of the oil mist filter includes: protection from oil mist emissions as required by COSHH and health and safety regulations. If the oil element becomes blocked, an integral pressure relief valve opens. This filter is very efficient at 99.999% DOP test and is also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. Replacement oil elements and odor elements are available on this website. For complete specifications download instruction manual (see below avaliable below).
This Pfeiffer HiPace 300, 300H, and 300C turbo pump oil fluid reservoir kit is used when performing Level 1 maintenance on the pump. The oil fluid reservoir lubricates the mechanical bearing at the bottom of the pump and keeps the pump operating at peak efficiency. This kit includes the oil fluid lubricant impregnated felt reservoir, O-ring and other required seals. The reservoir comes pre-filled with the proper amount of oil. Additional lubricant is not required. The oil fluid reservoir kit should be replaced at a minimum of every 4 years - more frequently if the pump is used under extreme operating conditions, or if the pump is exposed to unclean processes. This Pfeiffer oil fluid reservoir kit has part number PM 143 451 AT.
This Pfeiffer HiPace 80 turbo pump oil fluid reservoir kit is used when performing Level 1 maintenance on the pump. The oil fluid reservoir lubricates the mechanical bearing at the bottom of the pump and keeps the pump operating at peak efficiency. This kit includes the oil fluid lubricant impregnated felt reservoir, O-ring and other required seals. The reservoir comes pre-filled with the proper amount of oil. Additional lubricant is not required. The oil fluid reservoir kit should be replaced at a minimum of every 4 years - more frequently if the pump is used under extreme operating conditions, or if the pump is exposed to unclean processes. This Pfeiffer oil fluid reservoir kit has part number PM 143 740-T.
The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of
25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available
Step1: inhale and seal all the air in the volume chamber, and the compression begins;
Step 2: continue to compress to the center point of the volume cavity;
Step3: compress the air to the center of the volume chamber, and the exhaust will begin soon;
Step4: exhaust, end of a compression process
Step1: inhale and seal all the air in the volume chamber, and the compression begins;
Step 2: continue to compress to the center point of the volume cavity;
Step3: compress the air to the center of the volume chamber, and the exhaust will begin soon;
Step4: exhaust, end of a compression process