Product description
The handheld vacuum gauges TPG 201, TPG 202, can be directly connected to the cavity to measure and display the vacuum level in the measuring range from 1200 to 5X10-4 hPa. The battery-powered handheld gauges TPG 201 and 202 facilitate the display and storage of vacuum levels. TPG 201 works according to the principle of heat transfer (Pirani). The TPG 202 has a piezoresistive pressure sensor for high pressure ranges independent of gas type. The handheld vacuum gauge is equipped with a display that reads the pressure value directly on the instrument. The measured values can be read via the USB interface using the software "DokuStar"
Full-scale vacuum gauge PKR series with models PKR 251, PKR 261 and new models PKR 360, PKR 361. The full-scale vacuum gauge uses the inverted magnetron principle with built-in Pirani and cold cathode (anode rod), vacuum measurement range 1E-9 to 1000 hPa, output analog signal 0-10V, can be connected to PLC. The full-scale PKR series is available in corrosion-resistant versions with a wide range of universal interfaces for all vacuum applications and can be used with gauge displays TPG 361, TPG 362, TPG 256 A. Can assist customers in selection and provide perfect after-sales maintenance services.
Product description
1. Vacuum gauge display DPG 202 dual-channel design, can load 2 digital vacuum gauges and display readings at the same time, equipped with LCD backlight large screen, display units a variety of switching: mbar, bar, Pa, hPa, mTorr, Torr.
2. Power controller TPS 101, ideal for turbomolecular pumps HiPace 10/60, HiPace 80 SplitFlow 50/80, output current 4.6A, output voltage 24 (± 2 %) V DC.
*The digital gauge can also be connected to the Hipace turbomolecular pump power controller, which displays readings
Analog signal vacuum gauge ActiveLine dedicated display controller, universal power supply, easy operation, accurate reading.
The gauge display TPG series consists of gauge displays TPG 361 (replacing model TPG 261), TPG 362 (replacing model TPG 262) and TPG 256 A as well as the new TPG 366.
Diaphragm pump accessories corrosion-resistant pneumatic diaphragm valve plate
This pump membrane is used with the German KNF vacuum pump NMP850.
Vacuum pump pump membrane diaphragm
Note: This pump membrane is PTFE material, corrosion resistance, life of 8000 hours.
DIAMETER: 36MM
The installation thread is: M3
Diaphragm pump accessories Corrosion-resistant pneumatic diaphragm valve plate The pump membrane is made of PTFE material, corrosion resistance, and a service life of 8000 hours. Diameter: 40.7 mm The installation thread is: M4
This E2M175 direct drive rotary vane pump is inherently compact and vibration free with an ultimate pressure of 7.7x10-4 Torr and a pumping speed of 115 CFM at 60 Hz. These E2M175 vacuum pumps offers a finger-proof coupling housing and totally enclosed fan-cooled motors, that provides excellent operator protection. The E2M175's give the best combination of performance, reliability, and cost in relation to the anticipated applications.
INFICON (Germany) UL1000 fab mobile helium leak detector is specially designed to meet demanding industrial leak detection requirements: high durability, test flexibility, high sensitivity, fast start-up, accurate and fast response, and reliable system
Product description
The handheld vacuum gauges TPG 201, TPG 202, can be directly connected to the cavity to measure and display the vacuum level in the measuring range from 1200 to 5X10-4 hPa. The battery-powered handheld gauges TPG 201 and 202 facilitate the display and storage of vacuum levels. TPG 201 works according to the principle of heat transfer (Pirani). The TPG 202 has a piezoresistive pressure sensor for high pressure ranges independent of gas type. The handheld vacuum gauge is equipped with a display that reads the pressure value directly on the instrument. The measured values can be read via the USB interface using the software "DokuStar"
Full-scale vacuum gauge PKR series with models PKR 251, PKR 261 and new models PKR 360, PKR 361. The full-scale vacuum gauge uses the inverted magnetron principle with built-in Pirani and cold cathode (anode rod), vacuum measurement range 1E-9 to 1000 hPa, output analog signal 0-10V, can be connected to PLC. The full-scale PKR series is available in corrosion-resistant versions with a wide range of universal interfaces for all vacuum applications and can be used with gauge displays TPG 361, TPG 362, TPG 256 A. Can assist customers in selection and provide perfect after-sales maintenance services.
Product description
1. Vacuum gauge display DPG 202 dual-channel design, can load 2 digital vacuum gauges and display readings at the same time, equipped with LCD backlight large screen, display units a variety of switching: mbar, bar, Pa, hPa, mTorr, Torr.
2. Power controller TPS 101, ideal for turbomolecular pumps HiPace 10/60, HiPace 80 SplitFlow 50/80, output current 4.6A, output voltage 24 (± 2 %) V DC.
*The digital gauge can also be connected to the Hipace turbomolecular pump power controller, which displays readings
Analog signal vacuum gauge ActiveLine dedicated display controller, universal power supply, easy operation, accurate reading.
The gauge display TPG series consists of gauge displays TPG 361 (replacing model TPG 261), TPG 362 (replacing model TPG 262) and TPG 256 A as well as the new TPG 366.
Diaphragm pump accessories corrosion-resistant pneumatic diaphragm valve plate
This pump membrane is used with the German KNF vacuum pump NMP850.
Vacuum pump pump membrane diaphragm
Note: This pump membrane is PTFE material, corrosion resistance, life of 8000 hours.
DIAMETER: 36MM
The installation thread is: M3
Diaphragm pump accessories Corrosion-resistant pneumatic diaphragm valve plate The pump membrane is made of PTFE material, corrosion resistance, and a service life of 8000 hours. Diameter: 40.7 mm The installation thread is: M4
This E2M175 direct drive rotary vane pump is inherently compact and vibration free with an ultimate pressure of 7.7x10-4 Torr and a pumping speed of 115 CFM at 60 Hz. These E2M175 vacuum pumps offers a finger-proof coupling housing and totally enclosed fan-cooled motors, that provides excellent operator protection. The E2M175's give the best combination of performance, reliability, and cost in relation to the anticipated applications.
INFICON (Germany) UL1000 fab mobile helium leak detector is specially designed to meet demanding industrial leak detection requirements: high durability, test flexibility, high sensitivity, fast start-up, accurate and fast response, and reliable system