Molecular vacuum pump Grease lubricated air cooled molecular pump
TxFB-2000Z Grease lubricated air cooled molecular pump technical data
Txfb-2000z Grease lubricated air cooled molecular pump
High vacuum flange 250 CF 250 ISO-K
Front pipe flange 50 KF
Protective gas inflatable flange (anti-corrosion pump) 16 KF
Extraction speed (L/S) 2000
Compression ratio
N2 >109
H2 >1X104
Ultimate pressure (Pa) <8×10-8 <5×10-7
Motor revolution (N/min) 24000
Lubricate ceramic bearings with bearing grease
The vibration value of 0.1 microns or less
Startup time (min) <5
Recommended use of the front stage pump 8-15 L/S
Cooling mode Water cooling (air cooling)
Water cooling water temperature ≤20℃
Water cooling water flow (L/min) 1
Installation direction arbitrary Angle
Pump weight (kg) ≈32
Turbo pump Grease lubricated molecular pump
Txfb-650z grease lubricated compound molecular pump
High vacuum flange (inlet flange) 150 CF 160 ISO-K
Front pipe flange 40 KF
Protective gas inflatable flange (anti-corrosion pump) 16 KF
Extraction speed (L/S) 650
Compression ratio N
2 > 10
9 H
2 >1X10
4 ultimate pressure (Pa) <2×10
7 < 5 x 10
-7 Motor revolution (N/min) 24000
Lubricate ceramic bearings with bearing grease
The vibration value of 0.1 microns or less
Startup time (min) <5
Recommended use of the front stage pump 4-8L/S
Cooling mode Water cooling
Installation direction arbitrary Angle
Pump weight (kg) ≈30
Txfb-650zf Grease lubricated air cooled composite molecular pump
High vacuum flange (inlet flange) 150 CF 160 ISO-K
Front pipe flange 40 KF
Protective gas inflatable flange (anti-corrosion pump) 16 KF
Extraction speed (L/S) 650
Compression ratio N
2 > 10
9 H
2 >1X10
4 ultimate pressure (Pa) <2×10
7 < 5 x 10
-7 Motor revolution (N/min) 24000
Lubricate ceramic bearings with bearing grease
The vibration value of 0.1 microns or less
Startup time (min) <5
Recommended use of the front stage pump 4-8L/S
Cooling mode air cooling
Installation direction arbitrary Angle
Pump weight (kg) ≈30
Grease lubrication water cooling molecules Molecular pump
Table -1 TxFB-300Z grease lubricated water cooled molecular pump technical parameters table
Model TXFB - 300 - z
Inlet flange (inlet flange) 100 ISO-K or CF100
Exhaust flange KF25
Pumping rate (L/S)(nitrogen) 300
Compression ratio N
2 > 10
8 H
2 >1X10
3 The ultimate pressure (Pa) is less than 8×10
-7 Rated speed (RPM) 33000
Imported ceramic bearings are used
Vibration value (μm) ≤0.1
Startup time (min) <3.5
Molecular vacuum pump Grease lubricated air cooled molecular pump
TxFB-2000Z Grease lubricated air cooled molecular pump technical data
Txfb-2000z Grease lubricated air cooled molecular pump
High vacuum flange 250 CF 250 ISO-K
Front pipe flange 50 KF
Protective gas inflatable flange (anti-corrosion pump) 16 KF
Extraction speed (L/S) 2000
Compression ratio
N2 >109
H2 >1X104
Ultimate pressure (Pa) <8×10-8 <5×10-7
Motor revolution (N/min) 24000
Lubricate ceramic bearings with bearing grease
The vibration value of 0.1 microns or less
Startup time (min) <5
Recommended use of the front stage pump 8-15 L/S
Cooling mode Water cooling (air cooling)
Water cooling water temperature ≤20℃
Water cooling water flow (L/min) 1
Installation direction arbitrary Angle
Pump weight (kg) ≈32
Turbo pump Grease lubricated molecular pump
Txfb-650z grease lubricated compound molecular pump
High vacuum flange (inlet flange) 150 CF 160 ISO-K
Front pipe flange 40 KF
Protective gas inflatable flange (anti-corrosion pump) 16 KF
Extraction speed (L/S) 650
Compression ratio N
2 > 10
9 H
2 >1X10
4 ultimate pressure (Pa) <2×10
7 < 5 x 10
-7 Motor revolution (N/min) 24000
Lubricate ceramic bearings with bearing grease
The vibration value of 0.1 microns or less
Startup time (min) <5
Recommended use of the front stage pump 4-8L/S
Cooling mode Water cooling
Installation direction arbitrary Angle
Pump weight (kg) ≈30
Txfb-650zf Grease lubricated air cooled composite molecular pump
High vacuum flange (inlet flange) 150 CF 160 ISO-K
Front pipe flange 40 KF
Protective gas inflatable flange (anti-corrosion pump) 16 KF
Extraction speed (L/S) 650
Compression ratio N
2 > 10
9 H
2 >1X10
4 ultimate pressure (Pa) <2×10
7 < 5 x 10
-7 Motor revolution (N/min) 24000
Lubricate ceramic bearings with bearing grease
The vibration value of 0.1 microns or less
Startup time (min) <5
Recommended use of the front stage pump 4-8L/S
Cooling mode air cooling
Installation direction arbitrary Angle
Pump weight (kg) ≈30
Grease lubrication water cooling molecules Molecular pump
Table -1 TxFB-300Z grease lubricated water cooled molecular pump technical parameters table
Model TXFB - 300 - z
Inlet flange (inlet flange) 100 ISO-K or CF100
Exhaust flange KF25
Pumping rate (L/S)(nitrogen) 300
Compression ratio N
2 > 10
8 H
2 >1X10
3 The ultimate pressure (Pa) is less than 8×10
-7 Rated speed (RPM) 33000
Imported ceramic bearings are used
Vibration value (μm) ≤0.1
Startup time (min) <3.5